Pneumatic Connections - EKOM DK50 2V/50 Benutzerhandbuch

PNEUMATIC CONNECTIONS

Connecting to the compressed air outlet (Fig. 7)
Route the pressure line from the compressed air outlet (1) on
the compressor to the device.
Route the pressure hose through the opening in the rear wall
of the cabinet for cabinet-mounted compressors.
Connecting the cabinet pressure gauge to the compressor (Fig. 8)
Remove the threaded plug from the pneumatic block
on the compressor. Connect the cabinet pressure
gauge hose to the threaded fitting.
Connecting the condensate vessel (Fig. 9)
 Connect the drain hose (1) to the condensate vessel on compressors with dryers.
 Route the hose through the opening in the rear wall of the cabinet for compressor models with a
dryer and connect it to the vessel.
Fig. 9
NP-DK50 2V 50, 2x2V 110-15_10-2020-MD
1
-32-
Fig. 7
Fig. 8
1
DK50 2V/50
DK50 2x2V/110
1
2
1
10/2020