Pneumatic Connections - EKOM DUO Benutzerhandbuch

DUO, DUO 2V, DUO 2
12.3. Adding sound-insulating material into the cabinet
A component from the sound-insulating material is to be installed in the opening of the cabinet of
the compressor without a dryer.
This component is provided in the basic equipment delivered with the product.
A
C

13. PNEUMATIC CONNECTIONS

13.1. Connecting to the compressed air outlet
 The pressure line (2) is attached to the compressed air
outlet (1) on the compressor. Run the hose to the
compressed air manifold or directly to the dental set..
 Route the pressure hose through the opening in the rear
wall of the cabinet for cabinet-mounted compressors. (Fig.
8)
11/2021
B
- 27 -
Fig. 6
NP-DUO-13_11-2021-MD