EKOM DK50 2V/50 Benutzerhandbuch Seite 21

DK50 2V/50
DK50 2x2V/110
cabinet may rise above 40°C, causing the cooling fan blower to automatically turn on. After
cooling the cabinet area down to 32°C the fan blower turns off automatically.
Make sure that nothing impedes the free flow of air under and around the
compressor. Never cover the hot air outlet on the top back side of the cabinet.
If placing the compressor on a soft floor such as carpet, create space for
ventilation between the base and floor or the cabinet and floor, e.g. underpin the
footings with hard pads.
For 8-10 bar compressor models, an hourly meter is installed on the pressure switch.
Description for Figures 1-3
1. Air pump
2. Air tank
3. Non-return valve
4. Pressure switch
5. Safety valve
6. Pressure gauge
7. Drain valve
8. Inlet filter
9. Dryer
10. -
11. -
12. -
13. Solenoid valve
14. Dryer cooler
15. Filter
16. Condensate drain solenoid valve
17. Ball valve
10/2020
18. Socket
19. Condensate collection vessel
20. Magnetic holder
21. Fan
22. Cabinet fan
23. M5 screw
24. Cabinet gas springs
25. Cabinet enclosure
26. Wall stop
27. Switch
28. Pressure gauge
29. Power cord
30. Pressure gauge hose
31. Handle S110
32. Wheels
33. Connecting reinforcement
34. Connector of cabimet
35. Pulling system
-19- NP-DK50 2V 50, 2x2V 110-15_10-2020-MD