Carson Reflex Wheel Ultimate Touch Betriebsanleitung Seite 89

USB function
Description:
• None: the USB interface can be used only to
charge the battery of the transmitter.
• FS-iT4 emulator: when connected to a computer,
the transmitter acts as a standard HID with 4 axes
(one for each channel) and 3 switches (SW1, SW2
and SW3) and can be used as the main controller
in any compatible simulation software.
Operation:
1. Connect the transmitter to the computer by the
Micro USB cable.
2. Switch on the transmitter, then touch "system------"
"USB function------" "FS-iT4 simulator". After that,
the computer will automatic identify the HID.
3. In the computer control panel, double click
„game controller"--------"FS-iT4 emulalor" to test
whether the simulating function is ok.
About FS-iT4
Touch 'About FS-IT4', and the version of the current
firmware will be shown like the picture on the right.
Touch the „OK" button to go back.
Downloaded from www.Manualslib.com
CARSON Reflex Wheel Ultimate Touch 500500516
manuals search engine
D
89