Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Powering on the RC system
1. Connect all the components as described in the
operating instructions.
2. Switch on the transmitter at the power button.
3. Connect the RX battery to the receiver or the
driving battery to the ESC.
4. The red LED on the receiver will light up and
confirm the receipt of a correct signal.
5. If the error rate is less than 5%, the receiver signal
is stable.
6. The RC system can now be used.
To switch off, proceed in reverse order. Switch off
the receiver first, then the transmitter.
Downloaded from
www.Manualslib.com
CARSON Reflex Wheel Ultimate Touch 500500516
manuals search engine
Power switch
On/Off
LED
GB
65
Werbung
Kapitel
Inhaltsverzeichnis
