Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
MOD.
POS.
969-8200
1
Turbo-V70 pump, CFF 4.5" flange
2
Mechanical pump SD40
3
Controller Turbo-V70
969-8201
1
Turbo-V70 pump, ISO 63 flange
2
Mechanical pump SD40
3
Controller Turbo-V70
969-8202
1
Turbo-V70D pump, CFF 4.5" flange
2
Diaphragm pump MD40
3
Controller Turbo-V70
969-8203
1
Turbo-V70D pump, ISO 63 flange
2
Diaphragm pump MD40
3
Controller Turbo-V70
969-8204
1
Turbo-VLP pump, CFF 4.5" flange
2
Diaphragm pump MDP30
3
Controller Turbo-V70
969-8205
1
Turbo-V70LP pump, ISO 63 flange
2
Diaphragm pump MDP30
3
Controller Turbo-V70
969-8206
1
Turbo-V250 pump, CFF 6" flange
2
Mechanical pump SD40
3
Controller Turbo-V250
969-8207
1
Turbo-V250 pump, ISO 100 flange
2
Mechanical pump SD40
3
Controller Turbo-V250
969-8208
1
Turbo-V300HT pump, CFF 6" flange
2
Diaphragm pump MD60
3
Controller Turbo-V300HT
969-8209
1
Turbo-V300HT pump, ISO 100 flange
2
Diaphragm pump MD60
3
Controller Turbo-V300HT
969-8210
1
Turbo-V150HT pump, CFF 6" flange
2
Diaphragm pump MDP30
3
Controller Turbo-V150HT
969-8211
1
Turbo-V150HT pump, ISO 100 flange
2
Diaphragm pump MDP30
3
Controller Turbo-V150HT
Remote start/stop, pump status signals, forepump
start/stop, interlock control (for pressure switch, water
flow switch, etc.) capability, are provided via the
controller auxiliary connectors.
The Turbo Stack needs to be powered by a voltage of
220 Vac with a frequency of 50/60 Hz. The absorbed
power varies from 1055 to 1155 VA according to the
Turbo Stack configuration.
ITEM
83
STORAGE
When transporting and storing the Turbo Stack, the
following environmental requirements should be satisfied:
− temperature: from -20 °C to +70 °C
− relative humidity: 0 - 95% (without condensation)
PREPARATION FOR INSTALLATION
The Turbo Stack is supplied in a special protective
packing. If this shows signs of damage which may have
occurred during transport, contact your local sales office.
When unpacking the Turbo Stack, ensure that it is not
dropped or subjected to any form of impact.
Turbo Stack packaging
Do not dispose of the packing materials in an
unauthorised manner. The material is 100% recyclable
and complies with EEC Directive 85/399.
INSTALLATION
The Turbo Stack installation does not require specific
presettings.
WARNING!
Turbo Stack must be fixed to the standing plane by
means of suitable fixing device.
INSTRUCTIONS FOR USE
87-900-888-01(B)
Werbung
Inhaltsverzeichnis
