Installing The Seat Belt (Optional); Adjusting The Control Programme; Driving; Getting In - Handicare MIDWAY Bedienungsanleitung

•
Loosen knob A, see Figure 16 op pagina 18.
•
Take the arm rest from its guide.
Removing the head rest:
To remove the head rest, see "Head rest (optional)
3.2.10

Installing the seat belt (optional)

If you have chosen to install a seat belt, this is done using the rear Allen key, see Figure 4 on page 13.
3.2.11

Adjusting the control programme

The wheelchair has been provided with programmable controls.
Do not attempt to change the settings of the programme yourself. A programming cabinet is needed for this.
Only your dealer is able to change certain settings for you.
3.3

Driving

3.3.1

Getting in

Before being seated in your wheelchair:
•
Make sure the wheelchair is switched off.
•
Make sure the wheelchair is NOT in neutral.
•
Check the tyre pressure.
Fold the foot plates up and/or swivel the leg rests aside and be seated in the wheelchair.
on/off switch
alarm lights
(2 direction indicators
press simultaneously)
left-hand side
direction indicator
speed indicator
reduce speed
adjustment left-hand side
leg rest
back angle adjustment
Joystick (with more functions in
combination with function key)
Downloaded from www.Manualslib.com
Warning!
A seat belt on a wheelchair only serves to provide support. It must not be used as a car seat belt.
Warning!
Changing the settings may affect safety and performance features. Ask your dealer for details.
manuals search engine
horn
battery-condition indicator (and
fault indicator))
direction indicator right
increase speed
lighting switch
right-hand side leg-rest
adjustment
tilt adjustment
high/low adjustment
Figure 17
Operating instructions
19