Farther Back In The Chair - Handicare ReTurn7500 Gebrauchsanweisung

Farther back in the chair

If the user slides forward in the wheelchair, the ReTurn can be used to help the user to slide farther back in the chair.
Remove/raise the wheelchair foot plates, and then run the ReTurn in towards the wheelchair. The user places his/her feet
on the foot plate, grasps the raising ladder, leans forward, and then lifts from the seat. The caregiver provides counter
pressure. Slide the user farther back in the chair when he/she has lifted slightly from the seat.
Using ReTurnBelt together with ReTurn7500
See manual for ReTurnBelt.
ReTurnBelt is used for raising from a seated to a standing position, and for support in the standing position in
combination with the use of ReTurn transfer platform. ReTurnBelt has a more rigid lower section for easy application and
an elastic upper section for a better and more comfortable fit. ReTurnBelt has several gripping alternatives and a locking
strap for extra support and safety in connection with the use of the ReTurn platform.
Two caregivers with ReTurnBelt
Brake the wheels on the ReTurn. The user then leans
forward and grasps the handles on the ReTurn. The
caregivers then grasp the handles on the ReTurnBelt.
ReTurnBelt allows different gripping alternatives, and
helps and encourages the user to lean forward.
One caregiver helps the user to lean forward and pro-
vides support during raising.
SystemRoMedic
M A N U A L
TM
One caregiver with ReTurnBelt
Fasten the clasp without tensioning the strap. A click is heard
when the clasp is secured.
Brake the wheels on ReTurn.
The caregiver encourages the user to lean forward while
providing support during raising by grasping either a handle
or the strap.
The user leans forward and grasps the handles on ReTurn.
English
5