3.2.5
Head rest (optional)
Height adjustment
1. Loosen the M8 knob.
2. Slide the head rest to the desired height.
3. Tighten the knob.
(Also available as accessory: a height stop)
Angle adjustment
1. Using Allen key number 5, unscrew the M6 bolts, see Figure 13 above.
2. Turn the head rest to the desired position.
3. Tighten the bolts.
Depth adjustment
1. Using Allen key number 5, unscrew the two M6 bolts, see Figure 13 above.
2. Turn the head-rest holder in relation to the back frame to the desired position.
3. Tighten the bolts.
3.2.6
Suspension
Adjusting the spring pre-tension:
Turning nut A will raise or lower the spring pre-tension (see Figure 14 above).
Downloaded from
www.Manualslib.com
Figure 13
Figure 14
Figure 14 a
manuals search engine
adjusting bolts for angle adjustment
adjusting bolt for depth adjustment
M8 knob
nut A
The Atlantic is fitted with a double suspension
package:
nut A
Operating instructions
17