Wheelbase Joystick Module (Software Version V1.X) - Handicare MIDWAY Bedienungsanleitung

Wheelbase Joystick module (software version V1.x)

Your new Handicare wheelchair is equipped with the newest version software. This new software makes the wheelchair even more
user-friendly because of the following options:
1. Operating both powered legrests simultaneously.
2. Outdoor mode, in which you can choose:
•
Automatic indicators (Hazard lights on when driving backwards).
•
Sound signal (horn) when driving backwards.
Ad1. Of course, the option to operate both powered legrests simultaneously does not exclude the possibility to operate them
separately, this remains possible even when the option is activated.
Switching the option on/of
1. Wheelchair switched off.
2. Press both legrest buttons.
3. Switch on the wheelchair while pressing both legrest buttons, and hold them for 2 seconds until the speed LED(s) light up.
Using the option
When the option is switched on, You can switch on both legrests by pressing the left and right legrest one after another (both red
LEDs will light up) and then activate the legrests with the joystick.
Ad 2. The outdoor mode is designed to make it easier for you to drive outdoors and, of course, to increase your personal safety.
The option 'automatic indicators' in particular will be of great use to you, the indicators will switch on automatically when you
start making a turn. When driving backwards, the warning lights will light automatically; this is a distinct signal for your fellow
road users so that you are extra noted. Furthermore it is possible to activate a sound signal when driving backwards, by
programming the horn mode.
Selecting the automatic indicators:
1. Wheelchair switched off..
2. Press both buttons of the indicators.
3. Switch on the wheelchair while pressing both indicator buttons, and hold them for 2 seconds until the speed LED(s) light up.
Selecting the sound signal (horn) when driving backwards:
1. Wheelchair switched off..
2. Press the horn button.
3. Switch on the wheelchair while pressing the horn button, and hold it for 2 seconds until the speed LED(s) light up.
To activate this choice/ these choices you have to select the outdoor mode:
1. Wheelchair switched off..
2. Press the left or right indicator button during 2 seconds, this will activate the mode.
Deactivating the outdoor mode:
When driving indoor again, it may be irritating when your indicators and / or sound signal is activated. The outdoor mode can be
switched off by pressing the left or right indicator button for 2 seconds when the wheelchair is on.
Downloaded from www.Manualslib.com
A
TTENTION
manuals search engine
!!
Appendix
33