Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch GRO 12V-35 Professional Originalbetriebsanleitung

discharged at high velocity during the use of these
brushes and may become imbedded in your skin.
Additional safety information
Do not touch grinding and cutting discs until they have
u
cooled down. The discs can become very hot while work-
ing.
Secure the workpiece. A workpiece clamped with
u
clamping devices or in a vice is held more secure than by
hand.
This power tool is not suitable for bench-mounted use.
u
It must not be clamped into a vice or fastened to a work-
bench, for example.
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

The power tool is intended for cutting metal and stone ma-
terials, and for grinding, sanding and polishing metal and
painted surfaces without the use of water. In addition to this,
the power tool is suitable for drilling in wood, soft metal,
plastic and light building materials when used with the ap-
propriate accessories.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Cutting disc
(2) Holding rod
Bosch Power Tools
A)
(3) Grinding tools
(4) "PowerLight" lamp
(5) Spindle lock
(6) On/off switch
(7) Speed regulator
(8) Battery charge indicator
(9) Battery
(10) Direction-of-rotation arrow for grinding spindle
(11) Dust protection cap (for detailed work)
(12) Clamping nut
(13) Tool holder of the collet
(14) Handle (insulated gripping surface)
(15) Inner shank dimension L
0
(16) Battery release button
(17) Open-ended spanner/screwdriver
(18) Shank
(19) Collet
(20) Drive spindle
(21) Dust protection cap (for working close to surfaces)
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Technical Data

Cordless multi rotary tool
Article number
Rated voltage
A)
Rated speedl
Collets diameter
Spanner flat of collet
Max. outer diameter
– Cutting disc
– Grinding accessory
– Wire brush
– Grinding disc
– Drill bit
Max. inner shank dimension L
0
Max. shank length
Weight according to EPTA-Pro-
A)
cedure 01:2014
Recommended ambient temper-
ature during charging
Permitted ambient temperature
B)
during operation and during
storage
Recommended batteries
English | 17
GRO 12V-35
3 601 JC5 0..
V= 12
-1
min 5000 – 35000
mm 3.2
mm 9.55
mm 38
mm 22.5
mm 20
mm 20
mm 3.2
mm 10
mm 35
kg 0.65 – 0.85
°C 0...+35
°C –20 to +50
GBA 12V...
1 609 92A 54U | (26.07.2019)