Scope Of Delivery; Instructions For Use; Preparation For Use - Ottobock 1M10 Adjust Gebrauchsanweisung

► Do not use the product if its functionality has been impaired.
► Take any necessary measures (e.g. repair, replacement, inspection by the manufacturer's
customer service, etc.).
Signs of changes in or loss of functionality during use
Reduced spring effect or decreased forefoot resistance are indications of loss of functionality.

4 Scope of Delivery

The following single components and accessories are included in the scope of delivery in the spe­
cified quantities and are available for reordering as single components ( ), single components
with minimum order quantities ( ) or single-component packs ( ):
Fig. Item
– –
– –
1 –
1 –

5 Preparation for Use

CAUTION
Incorrect alignment or assembly
Risk of injury due to damaged prosthetic components
► Observe the alignment and assembly instructions.
INFORMATION
Not all of the materials listed may be available in your country.
► If the materials are not available, please contact the local branch of the manufacturer to
obtain information on alternative materials.
5.1 Alignment
5.1.1 Applying/removing the footshell
Inserting the foot into the footshell
1) Slide the prosthetic foot into the footshell (see fig. 3, see fig. 4).
2) Press the heel of the prosthetic foot into the footshell until it engages (see fig. 5).
Removing the footshell
1) Push the lock of the footshell to the rear and pull up the heel of the prosthetic foot.
2) Remove the prosthetic foot from the footshell.
12 | Ottobock
1M10 Adjust
Quantity Designation
1 ( )

Instructions for use

1 ( ) 1M10 Adjust
1 ( ) Footshell
– ( ) Insert for function module
Reference number
647G439
–
2C1
2D11