Scope Of Delivery - Ottobock 1S49 SACH Gebrauchsanweisung

NOTICE
Mechanical damage to the product
Change in or loss of functionality due to damage
► Use caution when working with the product.
► If the product is damaged, check it for proper function and readiness
for use.
► In case of changes in or loss of functionality, do not continue using the
product (see "Signs of changes in or loss of functionality during use" in
this section).
► Take any necessary measures (e.g. repair, replacement, inspection by
the manufacturer's customer service, etc.).
► Inform the patient.
NOTICE
Use under unallowable environmental conditions
Damage to product due to unallowable environmental conditions
► Do not expose the product to unallowable environmental conditions
(see the section "Environmental Conditions").
► If the product has been exposed to unallowable environmental condi­
tions, check it for damage.
► If damage is apparent or in case of doubt, do not continue using the
product.
► Take suitable measures if required (e. g. cleaning, repair, replacement,
inspection by the manufacturer or a specialist workshop etc.).
► Inform the patient.
Signs of changes in or loss of functionality during use
Reduced spring effect or decreased forefoot resistance are indications of
loss of functionality.

4 Scope of Delivery

The scope of delivery for the product is shown on page 2 (Figure 1).
The following single components and accessories are included in the scope
of delivery in the specified quantities and are available for reordering as
single components ( ), single components with minimum order quantities
( ) or single-component packs ( ):
12 | Ottobock