Siko LSC20 Originalbetriebsanleitung Seite 35

LSC20
Installation
slot
Fig. 9: Axis diagram
4. Move the sensor across the entire length of travel. The LED should
Fig. 10: Sensor Indicator LED
LSC20 · Date 08.07.2014 · Art. No. 87296 · Mod. status 012/14
O
z
X
be green over the entire length of travel. If the LED is Yellow or Red,
adjust Y, Z and Oz and refer to the interface drawing to ensure proper
mechanical design. (Passing over an Reference will cause the Diagnos-
tic Tool Reference / Limit LED to flash green.)
Y
Z
Sensor Indicator LED
English 35