Target Group; Basic Safety Information - Siko Lsc20 Originalbetriebsanleitung

LSC20
Safety information
Important operating information that may facilitate operation or cause
NOTICE
unplanned device reactions if disregarded including possible property
damage.
Signal signs

8.3 Target group

Installation instructions and User manual are intended for the configura-
tion, commissioning and mounting personnel of plant or machine manu-
facturers who possess special expertise in sensor technology. This group
needs profound knowledge of an sensor's necessary connections and its
integration into a complete machinery..
Insufficiently qualified personnel
WARNING
Insufficiently qualified personnel cause personal injury, serious damage to
machinery or sensor.
` Configuration, commissioning, mounting and maintenance by trained
` This personnel must be able to recognize danger that might arise from
Qualified personnel are persons who
• are familiar with the safety guidelines of the electrical and automation
• are authorized to commission, earth and label circuits and devices/

8.4 Basic safety information

Precautions
WARNING CAUTION CAUTION
` Follow standard ESD precautions. Turn power off before connecting
` Do not touch the tape scale unless you are wearing talc-free gloves or
LSC20 · Date 08.07.2014 · Art. No. 87296 · Mod. status 012/14
expert personnel only.
mechanical, electrical or electronic equipment.
technologies when performing configuration tasks;
systems in accordance with the safety standards.
the sensor. Do not touch the electrical pins without static protection
such as a grounded wrist strap.
finger cots. Please read this installation manual for full instructions.
English 27