Siko LSC20 Originalbetriebsanleitung Seite 30

LSC20
30 Installation
Items Required for Encoder Installation
• Hex wrench (M3)
• distance gauge (shipped with each sensor)
• Diagnostic Tool DT20 with Software
Scope of delivery:
• Distance gauge (shipped with each sensor)
Optional:
• Sensor adapter for installation into industry-standard mounting hole
patterns
• Diagnostic Tool DT20 with Software
Typical user-supplied
Sensor mounting bracket
Sensor mounting slots (2x)
Center stick-on index mark
Bracket mounting holes (2x)
Fig. 1: Mounting
LSC20 · Date 08.07.2014 · Art. No. 87296 · Mod. status 012/14
15 pin Standard D-sub connector
English
Bracket mounting Screws (2x)
Sensor Mounting screws
Double shielded cable