Mantis Compact ComposTumbler CT02001 Montageanleitung Seite 5

1.2
Align them by matching up the holes in the fins. Fasten the panels together with the screws (1a) and serrated
nuts (1b). Use the regular screwdriver and 3/8" wrench to tighten the nuts.
STEP 2 – DRUM ASSEMBLY
WHAT YOU'LL NEED
Tools: None
Hardware: None
Parts: Item 4 - (1) Endcap
(2) Foam Pads
Drum body assembly (from step 1)
2.1
Cardboard Spacer
Remove 2 foam pads packaged inside of the cardboard spacer and place them on the floor. Place the endcap (Item 4) with the
"Compact ComposTumbler" lettering facing down—on the pads.
Foam Pads
Foam Pads
5