Mantis Compact ComposTumbler CT02001 Montageanleitung Seite 11

STEP 8 – INSTALLING THE DRIVE GEAR
WHAT YOU'LL NEED
Tools: Plain (or needle nose) pliers
Hardware: 8a - (1) Cotter pin
Parts: Item 8 - (1) Drive support
Item 13 - (1) Drive gear
8.1
Push the drive gear through the tube in the drive support with the gear on the inside of the drive support.
8.2
Insert the handle bar in the drive gear and
fasten it with the cotter pin.
8.3
Use the pliers to bend the pin leg as shown
below.
11