Hybrid
Hybrid liners consist of polyurethane gel and silicone so that properties of
both materials can be used.
Ottobock recommends a total surface weight-bearing socket (the "Harmony"
principle) with a vacuum system (for instance, the AeroLink system).
1.2 Combination Possibilities
This prosthetic component is part of the Ottobock modular system. As a res
ult of its design, it may be combined with other prosthetic components of the
modular system. You can find possible restrictions in this section. Contact
the manufacturer with questions.
2 Application
2.1 Indications for use
The product is to be used solely for lower limb prosthetic fittings.
2.2 Service Life
The product is a wear part, which means it is subject to normal wear and
tear.
3 Safety
3.1 Explanation of Warning Symbols
Warning regarding possible serious risks of accident or injury.
WARNING
Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE
3.2 General Safety Instructions
WARNING
Product is pulled over mouth and nose
Danger of suffocation due to lack of oxygen supply
► Store the product away from the reach of children.
CAUTION
Contact with cold, heat, embers or fire
Injuries (e.g. burns) caused by melting of the material and damage to the
product
Ottobock | 11