Safety Instructions; Patient Information - Ottobock 10V39 Gebrauchsanweisung

4 Safety instructions

Attention!
• To guarantee a solid bond, clean the respective areas with
acetone before applying the adhesive. Do not touch the areas
after you have degreased them and when the acetone has dried
up, apply the adhesive immediately.
• Follow all fabrication and safety considerations of the adhesive
manufacturer.
• Please follow all recommended torque values.
• Use the 'Patient Information' section of this pamphlet (section
5) to inform your patient about the function and use of the Mo-
voWrist Flex.
Please avoid exposing prosthetic components to corrosive ele-
ments such as fresh water, salt water, and acids. Using this me-
dical product under such conditions will render all claims against
Otto Bock HealthCare null and void.
Please also inform your patient.

5 Patient information

The 10V39=* MovoWrist Flex has been developed for everyday life activi-
ties and must not be used for unusual activities such as extreme sports
(free climbing, parachute jumping, paragliding, etc.). Careful handling of
the prosthesis and its components not only increases the service life of the
product but, above all, ensures the patient's safety. Should the prosthesis
be subjected to unusual stresses (such as a fall), immediately contact your
prosthetist and have the prosthesis inspected for any damage. If neces-
sary, the prosthetist will pass the prosthesis on to the Ottobock Service.
Any damaged components may only be repaired by the Ottobock Service.
Attention!
• Please note that the position of terminal device may change when
you operate the flexion or rotation push buttons unintentionally.
14 | Ottobock
With the 10A30= M12×1,5 und 10A30=1/2"-20
Adapter mounted, the visible length of the distal
part increases to 17 mm.