Highspeed; Hwerror - Tetratec Instruments Lmf Serie Referenzhandbuch

Referenzhandbuch
LMF
LOAD
LOGLEVEL
MEAS
MELE n
NCOMBI n
OUTPUT n
PRIMARY n
PROG [sec prog]
PROGMENU
QUIT
RATING p
RPAR n
RUN code
SAVE
SCRIPTINFO
SISEND
STOP
SUBPROG [n]
SUBS n
TEMP
TESTMENU
TIMESTAT
VERS
ZERO
param
param=value

5.5.23 HIGHSPEED

Schaltet in bzw. aus dem Highspeed-Modus, wenn ein solcher konfiguriert ist.

5.5.24 HWERROR

Gibt Informationen über Hardware-Fehler aus. Siehe Parameterblock S0350 ff.
Seite 30
Load parameters from a file
Set the log level
Start measurement
Display mechanical element data
Print nozzle combination for section n
Display analog output data
Display primary element data
Query or set the running program
Enter the prog menu (hold F2)
Terminate the network connection
Show rating criteria for program p
Display read parameter n
Run a piece of script code
Save parameters
Script interpreter info
Send a command to a serial sensor
Stop measurement/soft reset
Display sub program data
Display subscription data
Use modified parameters
Enter the test menu (hold F3)
Print time statistics
Print the software version number
Zero all inputs
Query parameter value (i.e. P1234)
Set parameter (i.e. P1234=1)
LMF V7.0