Features And Controls - Briggs & Stratton BPW 2500 Bedienerhandbuch

Features and Controls

Read this Operator's Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A
B
C
D
E
F
G
H
J K
,
A - Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes trigger
lock.
B - High Pressure Hose — Connect one end to water pump
and the other end to spray gun.
C - Recoil Starter — Used for starting the engine manually.
D - Fuel Tank — Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
E - Adjustable Nozzle — Always attached to nozzle
extension. Adjustable nozzle allows you to adjust spray
pressure and spray pattern.
F - Throttle Lever — Sets engine in starting mode for recoil
starter and stops a running engine.
G - Detergent Siphoning Tube/Filter — Use to siphon
pressure washer safe detergent into the low pressure
stream.
H - Air Filter — Protects engine by filtering dust and debris
out of intake air.
10
J - High Pressure Outlet — Connection for high pressure
hose.
K - Water Inlet — Connection for garden hose.
L - Pump — Develops high pressure.
M - Automatic Cool Down System — Cycles water through
pump when water reaches 125°-155°F (51°C-68°C).
Warm water will discharge from pump onto ground. This
system prevents internal pump damage.
N - Engine Identification — Provides model, type and code
of engine. Please have these readily available if calling for
assistance.
P - Oil Fill/Dipstick — Check, fill and drain oil here.
R - Accessory Tray — Provides convenient storage for
standard and optional accessories, such as brushes,
turbo wands, etc.
Items Not Shown:
Identification Label (near rear of base plate) — Provides
model and serial number of pressure washer. Please have
these readily available if calling for assistance.
R
P
N
L M
,
BRIGGSandSTRATTON.COM