Customer Service And Spare Parts; Eu Declaration Of Conformity - SATA SATAjet 1000 ROB RP/HVLP Betriebsanleitung

Malfunc- Cause
tion
Corrosion Unsuitable
on air cap cleaning
thread, solution.
material
passage
or nozzle
head.
Air escapes Defective
from the seal retain-
end cap er (air side).
inspection
hole (op-
tionally from
material
Defective
flow control
seal or
or regulat-
sleeve.
ing cap).
Material Defective
leaks from paint needle
behind seal.
the paint
needle seal
through the
gun body
Paint nee-
inspection
dle clogged
hole.
or dam-
aged.
Automatic Contam-
gun ination
between
paint needle
tip and fluid
tip.
Damaged
nozzle set.
SATA ROB Automatic Gun Operating Instructions
13. Customer service and
Correc-
tive ac-
Customer service department
Replace
SATA GmbH & Co. KG
nozzle
head. Heed
Domertalstraße 20
cleaning
D-70806 Kornwestheim
instructions
(see chap-
ter 10.3).
Automatic gun spare parts
Replace
See enclosed Technical Data Sheet
paint needle
for list of spare parts.
seal re-
tainer (see
chapter
14. EU Declaration of Con-
10.3).
Replace
We hereby declare that the follow-
seal or
sleeve (see
ing product in the version sold by
chapter
SATA, due to its conception, design
10.4).
and construction complies with
Replace
the basic safety requirements of
paint needle
seal re- the directive 94/9/EC including the
tainer (see
modifications valid at the time of the
chapter
declaration, and that it can be used
10.3).
in explosive areas (ATEX), annex
Replace
X, B, according to EC directive
nozzle set
(see chap-
94/9/EC.
ter 10.1).
Clean fluid
Manufacturer:
tip and paint
SATA GmbH & Co. KG
needle.
Domertalstrasse 20
D-70806 Kornwestheim
Replace
Product description
nozzle set
The automatic gun is available in
(see chap-
the following variations
ter 10.1).
■ SATAjet 1000 ROB™ RP
■ SATAjet 1000 ROB™ HVLP
■ SATAjet 3000 ROB™ RP
■ SATAjet 3000 ROB™ HVLP
■ SATAminijet 1000 ROB™ RP
■ SATAminijet 1000 ROB™ HVLP
spare parts
formity
EN
®
®
®
111