Clock Set In/Out Terminals - Sony SVT-S168P Bedienungsanleitung

Terminals
4
Press MENU V to move the flashing to the setting
of MODE of SW OUT and set to FIELD or
FRAME by pressing MENU + or – and press
MENU V again.
BUZZER ALARM IN
TAPE END
KEY IN
SW OUT MODE
TIMING
3H MODE
<NEXT PUSH >
+ –
SELECT : DATA SET : /
5
Set TIMING by pressing MENU + or – and press
MENU V.
TAPE END
KEY IN
SW OUT MODE
TIMING
3H MODE
<NEXT PUSH >
+ –
SELECT : DATA SET : /
6
Press MENU V to move the flashing to the setting
of 3H MODE of SW OUT and set to ON or OFF
by pressing MENU + or –.
ON: a signal is output in the 3-hour mode.
OFF: a signal is not output in the 3-hour mode.
7
Press SEARCH/AUDIO ON to return to the
normal display.
46
(GB)
ON
ON
OFF
FIELD
0 1
ON
RETURN : MENU
ON
OFF
FIELD
0 4
ON
RETURN : MENU

CLOCK SET IN/OUT Terminals

You can set the clock of this unit using an external
switch.
When you use one unit as the master VCR, you can set
the clock of the units connected to the master VCR
using the master VCR.
When Using an External Switch
to CLOCK SET IN
to CLOCK SET OUT
to CLOCK SET IN
to CLOCK SET OUT
to CLOCK SET IN
When Using One Unit as a Master VCR
Master VCR
to CLOCK SET OUT
to CLOCK SET IN
to CLOCK SET OUT
to CLOCK SET IN
External switch
to COM
to COM
to COM
to COM
to COM