Setting The Operation Mode When Inserting A Tape - Sony SVT-S168P Bedienungsanleitung

Setting the Operation Mode When Inserting a Tape

You can set the operation mode for the VCR when a
video cassette is inserted on the GENERAL SET
menu.
1
1
Turn on the power of the equipment to be used.
2
Press MENU and MENU V until "4" of the MAIN
MENU flashes on the monitor screen.
< >
MAIN MENU
1. LANGUAGE
CLOCK SET
SUMMER TIME SET
2. DISPLAY SET
BUZZER
SW OUT
3. ALARM SET
4. GENERAL SET
5. TIMER SET
6. HOLIDAY SET
7. POWER FAILURE/DEW
USED HOUR
8. ALARM DATA
SELECT : NEXT : RETURN : MENU
3
Press MENU B.
The GENERAL SET menu appears and "STOP"
of TAPE IN MODE flashes.
GENERAL SET
TAPE IN MODE STOP
TAPE END MODE REW
TAPE USED COUNT OFF
CLOCK ADJUST 0 1 : 0 0
APC ON
THREAD CHECK OFF
T/D SEARCH CONVENTION
BAUD RATE 1 9 2 0 0
<NEXT PUSH >
+ –
SELECT : DATA SET : / RETURN : MENU
18
(GB)
2-4 5
4
Set to STOP or REC by pressing MENU + or –.
STOP: the VCR remains in stop mode even when
a video cassette is inserted.
REC: the VCR starts recording when a video
cassette is inserted.
5
Press SEARCH/AUDIO ON to return to the
normal display.
To return to the MAIN MENU screen from the
current menu
Press MENU again.
To go to the next menu from the current menu
Press MENU V until "NEXT PUSH B" flashes and
press MENU B.