Setting The Buzzers - Sony SVT-S168P Bedienungsanleitung

Setting the Buzzers

You can turn on/off three types of buzzers:
• ALARM IN buzzer: beeps while it receives an
alarm signal. (See "Alarm Recording" for more
information on page 32 (GB).)
• TAPE END buzzer: beeps when the tape reaches its
end.
• KEY IN buzzer: beeps when you press a button.
1
1
Turn on the power of the equipment to be used.
2
Press MENU and MENU V until "2" of the MAIN
MENU flashes on the monitor screen.
< >
MAIN MENU
1. LANGUAGE
CLOCK SET
SUMMER TIME SET
2. DISPLAY SET
BUZZER
SW OUT
3. ALARM SET
4. GENERAL SET
5. TIMER SET
6. HOLIDAY SET
7. POWER FAILURE/DEW
USED HOUR
8. ALARM DATA
SELECT : NEXT : RETURN : MENU
3
Press MENU B.
The DISPLAY SET/BUZZER/SW OUT menu
appears.
DISPLAY SET DATE
TIME
SPEED
ALARM
WARNING
BUZZER ALARM IN
TAPE END
KEY IN
SW OUT MODE
TIMING
3H MODE
<NEXT PUSH >
+ –
SELECT : DATA SET : / RETURN : MENU
16
(GB)
2-4 5
ON
ON
ON
ON
ON
ON
ON
OFF
FIELD
0 1
ON
4
Press MENU V to move the flashing to the setting
of each ALARM IN, TAPE END and KEY IN, and
set to ON or OFF by pressing MENU + or –.
DISPLAY SET DATE
TIME
SPEED
ALARM
WARNING
BUZZER ALARM IN
TAPE END
KEY IN
SW OUT MODE
TIMING
5
Press SEARCH/AUDIO ON to return to the
normal display.
To return to the MAIN MENU screen from the
current menu
Press MENU again.
To go to the next menu from the current menu
Press MENU V until "NEXT PUSH B" flashes and
press MENU B.
ON
ON
ON
ON
ON
ON
ON
ON
FIELD
0 1