Specifications - Sony SVT-S168P Bedienungsanleitung

Specifications
General
Recording method Rotary 2-head azimuth helical
scanning system
Audio recording In 3-, 12-, and 24-hour modes
Tape speed 23.39 mm/sec (3-hour mode)
Specified video cassette tape
VHS and S-VHS 1/2 inch video
cassette tape
Recording/playback time
3, 12, 24, 48, 72, 96, 120 and 168
hours (when using E-180 tape)
Fast-forward/rewind time
Approx. 165 seconds
(when using E-180 tape)
Colour system PAL colour
Video
Recording method Luminance signal: FM method
Colour signal: Subcarrier low
frequency conversion method
BNC: 1±0.3 Vp-p, 75 Ω
Input
unbalanced
S-VIDEO IN (Mini DIN 4-pin)
BNC: 1±0.2 Vp-p, 75 Ω
Output
unbalanced
S-VIDEO OUT (Mini DIN 4-pin)
Horizontal resolution
400 lines (S-VHS, Black & white
mode/Colour mode)
320 lines (VHS, Black & white
mode)
240 lines (VHS, Colour mode)
S/N 46 dB (S-VHS), 44 dB (VHS)
Audio
Input –8 dBs, phono jack
27 kΩ unbalanced
Output –8 dBs, phono jack
600 Ω unbalanced
Microphone input –60 dBs,
ø3.5 mm minijack,
10 kΩ
Audio frequency response
50 Hz – 10 kHz
Distorsion Less than 4.0%
S/N 43 dB
58
(GB)
Connector
Alarm input Low level
Alarm output +5 V, 5.7 kΩ (Low active)
Switch output +5 V, 5.7 kΩ (Low active)
Tape end output +5 V, 5.7 kΩ (Low active)
Warning output +5 V, 5.7 kΩ (Low active)
External timer input
Low level
Clock set output +5 V, 5.7 kΩ (Low active)
Clock set input Low level
Series output +5 V, 5.7 kΩ (Low active)
Series input Low level
Remote control input
ø3.5 mm stereo minijack
Other specifications
Operating temperature range
5°C to 40°C
Operating humidity range
80% or less
Power supply 220 – 240 V AC, 50 Hz
Power consumption
22 W
External dimensions
Approx. 420 × 99.5 × 295.5 mm
(w/h/d) (with the projection parts
and connectors)
5
(16 /
8
Mass Approx. 4.6 kg (10 lb 2 oz)
Supplied accessory
AC power cord (1)
Operating instructions (1)
Optional accessories
SVT-RM10 Remote Control Unit
Design and specifications are subject to change
without notice.
× 4 × 11
3
/ in.)
4