User Information; Important Notes; Safety Instructions; Ec Declaration Of Conformity - Bosch FSA 050 Originalbetriebsanleitung

2.

User information

2.1

Important notes

Important information on copyright, liability and
warranty provisions, as well as on equipment users
and company obligations, can be found in the separate
manual "Important notes on and safety instructions
for Bosch Test Equipment". These instructions must
be carefully studied prior to start-up, connection and
operation of the FSA 050 and must always be heeded.
2.2

Safety instructions

All the pertinent safety instructions can be found
in the separate manual "Important notes on and
safety instructions for Bosch Test Equipment". These
instructions must be carefully studied prior to start-
up, connection and operation of the FSA 050 and must
always be heeded.
2.3

EC Declaration of Conformity

FSA 050 bears the CE mark in accordance with the
applicable EC Directives. The EC Declaration of
Conformity is available for download as Adobe PDF
document from
http://downloads.bosch-automotive.com
2.4

Electromagnetic compatibility (EMC)

FSA 050 satisfies the criteria of the European Directive
EMC 2014/30/EU.
This device is not intended for use within residential
areas and cannot provide sufficient protection in such
environments.
2.5

Measuring category

FSA 050 complies with the general safety requirements
for electrical testers, measuring instruments and
accessories in EN 61010-1 and EN 61010-2-033.
FSA 050 and the terminal blocks and measurement
cables supplied are designed for test and measurement
circuits of Category IV (CAT IV) up to 600 V.
2.6

RED (Radio Equipment Directive)

Robert Bosch GmbH hereby declares that the radio
equipment type FSA 050 conforms to the European
Directive RED 2014/53/EU. The complete text of the EU
declaration of conformity is available from the following
web address:
http://www.downloads.bosch-automotive.com
i
In non-European countries, the corresponding
national regulations on the operation of wireless
devices in the 2.4 GHz and 5 GHz frequency band
must be heeded (e.g. WLAN or Bluetooth).
Robert Bosch GmbH
2.7
i
Users of wireless systems are responsible for
compliance with the applicable directives and
restrictions in the country concerned.
A "wireless system" in the sense of the European
Directive RED 2014/53/EU (Radio Equipment Directive)
is an electrical or electronic product (component) that
transmits and/or receives radio waves as permitted
for the purpose of wireless communication and/or
radiolocation.
WLAN and Bluetooth instructions can be found in the
separate instructions "Data protection, data security,

wireless connections".

http://mediathek.bosch-automotive.com/files/common/documents/1689/989393.pdf
These instructions must be carefully studied prior to
start-up, connection and operation of the FSA 050 and
must always be observed.
2.8
.
2.8.1
The Bluetooth USB adapter included in the scope of
delivery is inserted into the PC/laptop and provides a
radio link to components of FSA 050 capable of wireless
communication.
2.8.2
i
In the event of problems with the Bluetooth radio
link, refer to the information in the separate
instruction "Bluetooth USB Adapter".
http://mediathek.bosch-automotive.com/files/bosch_wa/989/277.pdf
2.9
The "CoRe" software (Connected Repair) makes it
possible to exchange customer and vehicle information
as well as protocols in the workshop. For this, the testers
(CoRe clients) are connected to a central computer
(CoRe server) via the computer network.
Related documents:
Current overview of products supporting CoRe:
http://mediathek.bosch-automotive.com/files/common/documents/1689/989386.pdf
Notes on system requirements, installation and other

information on CoRe:

http://mediathek.bosch-automotive.com/files/common/documents/1689/989372.pdf
User information | FSA 050 | 23
Wireless connections

Bluetooth

Bluetooth USB adapter

Troubleshooting

Information on CoRe
1 689 989 102
en
|
2019-05-24