Herunterladen Inhalt Inhalt Diese Seite drucken

Lcd; Battery Charge Indicator; Defective Fuse Symbol; Bluetooth Usb Adapter - Bosch FSA 050 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für FSA 050:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
4.5

LCD

1
2
14
13
12
11
10
Fig. 5:
LCD
1 Continuity measurement symbol
2 Digital auxiliary display
3 Auxiliary display units
4 Buzzer on

5 Battery charge indicator

6 Analog display
7 TRMS symbol (AC)
8 Main display units
9 Digital main display for measured value and status (FSA/STA)
10 Symbol for zeroing of measurement leads
11 Range overshoot symbol

12 Defective fuse symbol

13 Insulation analysis symbol (test voltage applied)
14 Lock symbol (insulation analysis)
4.6
Battery charge indicator
The current charge of the batteries is always indicated
on the LCD (fig. 5, pos. 5). The number of bars shows
the charge of the batteries in percent (fig. 6).
Fig. 6:
Battery charge
i
Rechargeable NiMH or NiCAD batteries indicate a
lower charge than alkaline cell batteries. As a result,
the charge indicator may abruptly switch to 0 % just
before becoming flat.
Robert Bosch GmbH
3
4
5
6
7
459896-07_Ko
9
Product description | FSA 050 | 27
4.7
Defective fuse symbol
!
The fuse in the FSA 050 must always have the
correct rating – 500 mA (FF).
The defective fuse symbol (fig. 5, pos. 12) flashes on
the LCD if the internal fuse of the FSA 050 has blown
due to overload.
The fuse rating is indicated on the rating plate of the
FSA 050.
8
4.8

Bluetooth USB adapter

Only the Bluetooth USB adapter included in the scope
of delivery provides a radio link with the FSA 500/
FSA 7xx. It is plugged into the computer. The flashing
LED shows that it is ready for operation.
i
It is not possible to operate any other Bluetooth
hardware fitted in or plugged into the computer.
i
The Bluetooth driver is installed if the menu item
"Use FSA 050" is selected in the CompacSoft[plus]
software under "Settings" and confirmed with <F7>
or <F12>. The FSA 050 MAC address is printed
under the protective rubber on the reverse side of
the device.
i
With a Bluetooth communication,
pos. 2) on the LCD display for approx. one second
after pressing the selection button  (fig. 3, pos. 4).
!
Do not subject the Bluetooth USB adapter
connected to the computer to mechanical strain or
use it as a handle. This could damage the computer
or Bluetooth USB adapter.
en
appears (fig. 5,
bt
|
1 689 989 102
2019-05-24

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis