Symbols Used; In The Documentation; Warning Notices - Structure And Meaning; Symbols In This Documentation - Bosch KTS 3a-Serie Originalbetriebsanleitung

1.

Symbols used

1.1

In the documentation

1.1.1

Warning notices - Structure and meaning

Warning notices warn of dangers to the user or
people in the vicinity. Warning notices also indicate
the consequences of the hazard as well as preventive
action. Warning notices have the following structure:
KEY WORD – Nature and source of hazard!
Warning
symbol Consequences of hazard in the event of
failure to observe action and information
given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-observance:
Key word Probability of
occurrence
DANGER Immediate impending
danger
WARNING Possible impending
danger
CAUTION Possible dangerous
situation
1.1.2

Symbols in this documentation

Symbol Designation Explanation
Attention Warns about possible property damage.
!
Information Practical hints and other
i
useful information.
1. Multi-step Instruction consisting of several steps.
2. operation
One-step Instruction consisting of one step.
e
operation
Intermediate An instruction produces a visible

result intermediate result.
Final result There is a visible final result on
"
completion of the instruction.
1.2

On the product

!
Observe all warning notices on products and ensure
they remain legible.
Attention: general warning sign informing of
potential danger.
Before start up, connecting and operating
Bosch products it is absolutely essential that
the operating instructions/owner's manual
and, in particular, the safety instructions are
studied carefully.
Robert Bosch GmbH
Severity of danger if
instructions not observed
Death or severe injury
Death or severe injury
Minor injury
Symbols used | KTS 350 (KTS 3a Series) | 15
2.

User information

2.1

Important notes

Important information on copyright, liability and
warranty provisions, as well as on equipment users
and company obligations, can be found in the separate
manual "Important notes on and safety instructions
for Bosch Test Equipment". These instructions must
be carefully studied prior to start-up, connection and
operation of the KTS 350 (KTS 3a Series) and must
always be heeded.
2.2

Safety instructions

All the pertinent safety instructions can be found
in the separate manual "Important notes on and
safety instructions for Bosch Test Equipment".
These instructions must be carefully studied
prior to start-up, connection and operation of the
KTS 350 (KTS 3a Series) and must always be heeded.
2.3

RED (Radio Equipment Directive)

Robert Bosch GmbH hereby declares that the
radio equipment type KTS 350 (KTS 3a Series)
conforms to the European Directive 2014/53/EU. The
complete text of the EU declaration of conformity
is available from the following web address:
http://www.downloads.bosch-automotive.com
i
In non-European countries, the corresponding
national regulations on the operation of wireless
devices in the 2.4 GHz and 5 GHz frequency band
must be heeded (e.g. WLAN or Bluetooth).
2.4

Wireless connections

i
Users of wireless systems are responsible for
compliance with the applicable directives and
restrictions in the country concerned.
A "wireless system" in the sense of the European
Directive RED 2014/53/EU (Radio Equipment Directive)
is an electrical or electronic product (component) that
transmits and/or receives radio waves as permitted
for the purpose of wireless communication and/or
radiolocation.
WLAN and Bluetooth instructions can be found in the
separate instructions "Data protection, data security,
wireless connections".
http://mediathek.bosch-automotive.com/files/common/
documents/1689/989393.pdf
These instructions must be carefully studied
prior to start-up, connection and operation of the
KTS 350 (KTS 3a Series) and must always be observed.
en
|
1 689 989 293 2019-06-24