Use Of The Appliance - Unold MULTI 3 IN 1 ONYX Bedienungsanleitung

3. Wipe the housing with a damp cloth. Make sure that no water can penetrate
into the housing.
4. Put the plug into a socket.
5. Grease the plates slightly and preheat the empty appliance for about 10 min-
utes. Then wipe the plates with a damp cloth.
6. The first toast / waffle should not be used and should be thrown away.
7. For further used the plates must not be greased any more (except if provided
in the recipe).
8. The appliance is now ready for being used.

USE OF THE APPLIANCE

1. Attach the set of plates which you intend to use by pressing the plates into
the hinge. The sliding holders will slightly move to the front.
2. Put the plug into the socket (power supply 230 V~, 50 Hz) and turn the
temperature button to the desired position between MIN and MAX. The red
control lamp turns on and keeps on lighting as long as the appliance is con-
nected to the power.
3. Use the preheating phase of the Multi 3 in 1 (approx. 5 minutes) to prepare
the ingredients.
4. As soon as the required temperature is reached, the green control lamp
turns on. This lamp will always turn on, when the required temperature is
reached and turns off, when the temperature has fallen and the appliance
is heating again.
5. Before the first use, grease the plates with some oil or butter.
6. Now place either
ƒ the prepared sandwiches on the sandwich moulds, or
ƒ fill the dough into the waffle plates, or
ƒ place the food to be grilled on the riffled grill plate.
7. Close the lid. When preparing sandwiches, also close the handle locking!
8. To keep the prepared snacks warm, reduce the heat to MIN, but keep always
in mind that the snacks will get dry after a certain time.
30