Preparing The Appliance For Operation - Unold WAFFELAUTOMAT FLIP 48205 Bedienungsanleitung

19. Make sure that the lead cable
does not touch the hot appli-
ance.
20. Do not use the appliance
near flammable liquids. Fire
hazard!
21. The appliance becomes hot
during operation. Please use
the handles or pot holders
when moving the appliance.
22. Do not leave the appliance
unattended when it is still
hot. Risk of burns!
23. Open the lid completely
when placing the dough onto
the waffle plates or removing
the waffles. Otherwise the lid
may fall down. Risk of burns
and injury!
24. For safety reasons never
cover the appliance or the
waffle plates with paper,
plastic film or other foreign
material. Otherwise the risk
of fire hazard exists!
CAUTION:
The appliance becomes very hot during operation!
Never open the housing of the appliance. This can result in electric
shock.
The manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.

PREPARING THE APPLIANCE FOR OPERATION

1. Before using the appliance for the
first time, we recommend that you
wipe off the two non-stick baking
surfaces with a damp cloth.
2. Open the window during the burn-
in phase that now follows.
Copyright UNOLD AG | www.unold.de
25. Never touch the waffle plates
during operation or shortly
afterwards with any part of
the body or heat sensitive
objects.
26. Do not store the appliance
when it is still hot.
27. Check the plug and lead
cable regularly for wear and
damage. In case the lead
cable or other parts present
damages, please send the
appliance to our after-sales
service for inspection and
repair. Unauthorised repairs
can constitute serious risks
for the user and void the war-
ranty.
28. If the lead cable is dama-
ged, it must be replaced by
the manufacturer or its after-
sales service or a similarly
qualified person in order to
avoid any hazard.
3. Connect the appliance, plug the
mains plug into an electrical out-
let (230 V~, 50/60 Hz). The ope-
rating indicator light is illumina-
ted and shows that the heating
circuit is in operation.
19