3ºc Soft Or Hard Blast Chill Cycle And -18ºc Soft Or Hard Shock Freezing With Core Probe - Nordcap Project Line Gebrauchs- Und Wartungshandbuch

7.3.1. + 3ºC SOfT OR HARD bLAST CHILL CYCLE AND -18ºC SOfT OR HARD SHOCk
fREEZING WITH CORE PRObE
bLAST CHILL/SHOCk fREEZE PHASE
Press the
hard cycle.
Press the
hard cycle.
DISPLAY 1 the core probe temperature.
DISPLAY 2 indicates the cabinet temperature.
DISPLAY 3 A for Automatic (Fig.2).
(Fig.2)
The following symbols light up: core probe
bol soft or shock freeze hard
When button
with pre determined phase changes.
To start the selected cycle press the
Within the first 3 minutes, the electronic control performs a core probe insertion test to verify the ef-
(Fig.3)
fective application of the probe in the product to blast chill (flashing core probe symbol).
If the core probe is inserted badly or left in the holder provided, the cycle is automatically converted to timer.
During a timed blast chill cycle, DISPLAY 1 indicates the time to the end of the cycle itself (Fig.4);
DISPLAY 2 indicates the cabinet temperature; DISPLAY 3 indicates the blast chill phase in progress.
(Fig.4)
If the core temperature has not been reached within the time determined, the time out alarm is activated.
The blast chill phase continues but the
memorised in the HACCP archives. The code AL5 flashes on DISPLAY 1 (Fig.5).
(Fig.5)
The alarm is automatically cancelled when passing to the conservation phase and the symbol remains
HACCP
on
Pressing the button
of blast chilling is indicated. Press for extened time the multi-point button
sion the temperature of the 4 sensors on DISPLAY 2 and the corresponding number of the sensor on
DISPLAY 3.
The undetected inserted sensor is displayed in DISPLAY 3 with the symbol
Upon termination of the blast chill cycle the machine automatically continues on to the conservation
phase. see 7.3.7.
Pressing the button
the cycle.
, button to select the +3ºC soft blast chill cycle and the
, button to select the -18°C soft blast chill cycle and the
, or soft
is pressed, the A for Automatic will disappear and blast chilling cycle will be executed
.
and , at any time during the cycle in progress, the time from the start
and
+3 SOFT
-18 SOFT
, type of blast chill soft
+ the symbol soft ,temperature
, button and the blast chill symbo
and HACCP and HACCP symbols flash and the alarm is
it is possible to visualize the elapsed time from the beginning of
EN - 25
button for the +3ºC
button for the -18ºC
or soft + the sym-
and .
lights up (Fig.3).
to display in succes
.
+3 HARD
-18 HARD