General Recommendations - Nordcap Project Line Gebrauchs- Und Wartungshandbuch

GENERAL RECOMMENDATIONS

For correct use of the spike probe:
- avoid violent blows, they can jeopardise the correct
functioning of the probe;
- sterilise the spike before use;
- the maximum recommended thickness of the product
is 45mm;
- cleanliness of the spike determines good performance.
TO INSERT THE PRObE
- Insert the probe with the point as near as possible to
the heart of the product.
- To only insert the part polishes.
TO EXTRACT THE PRObE
- Heat the probe see 7.3.7.
- Turn it.
- Extract it without tilting the spike.
H 45mm
H 45mm
H 45mm
H 45mm
H 45mm
H 45mm
EN - 23
H max = 45mm
single point-probe
multi point-probe