Blast Chill Or Shock Freeze Personalize Cycle; In Order To Modify The Data In Not Permanent Way - Nordcap Project Line Gebrauchs- Und Wartungshandbuch

28 - EN
7.3.5. bLAST CHILL OR SHOCk fREEZE PERSONALIZE CYCLE "A" ,
It is possible to modify the breakdown/freezing cycle:
automatic
personalising them as required.
The breakdown or freezing cycle is divided into three phases where it is possible to modify the following
values:

IN ORDER TO MODIfY THE DATA IN NOT PERMANENT WAY

Press and hold the respective cycle button
Control displays (Fig.12):
SCREEN 1 - modifiable cell temperature
SCREEN 2 - no signal (off)
SCREEN 3 – the number of the phase (Fig
(Fig.12)
The cell temperature symbol
temperature is increased or decreased for the phase being modified and displayed on DISPLAY 3.
With a further pressing the "initially selected cycle button", by pressing the button
value of the set % value of the rotation speed of the fan/s of the cell increases or decreases for the
phase being modified and displayed on DISPLAY 3.
With a further pressing the "initially selected cycle button" the pin symbol flashes
pressing the button
modified and displayed on DISPLAY 3.
With a further pressing the "initially selected cycle button"the clock
the button
Repeat the same procedure described for the later phases 2 and 3.
Phase 4 of conservation only involves setting the set temperature. To confirm the settings of all the
phases described, press the relevant key With a further pressing the "initially selected cycle button"
/
Press the
At the end of the cycle the machine moves into conservation phase automatically, see 7.3.7.
By pressing the button
stored as described at ch. 7.3.8.
The new sets of the personalised cycle will be lost when the machine is stopped with key
See tecincal manual
S _ _ = setpoint
SET CABINET
SET FAN SPEED
SET CORE
SET TIME
A
, timed
flashes, by pressing the button
and
and value of the set time value increases or decreases.
/ (+3) / (-18) for extended time.
button to start the cycle.
and
, probe
/ /
value of the set pin temperature changes for the phase being
displays the duration of the cycle just finished, and it can be
BLAST CHILL OR SHOCK FREEZE
PHASE 1 PHASE 2
S01 S04
S50 S51
S02 S05
S03 S06
,
,
(+3) / (-18) for extended time.
and the value of the set
symbol flashes, by pressing
PHASE 3
S07
S52
S08
S09
and
, by
.
CONSERVATION
PHASE 4
S10
S53
- -
- -