User Instructions; Control Panel - Nordcap Project Line Gebrauchs- Und Wartungshandbuch

22 - EN

7. uSER INSTRuCTIONS

7.1. CONTROL PANEL

Description of control panel
ON /OFF
On/off pannel control
START/STOP
This button is also used to start/interrupt operation
during the blast chill/shock freeze/conservation cycle
+3°C SOFT BLAST CHILL
Selection cycle blast chill +3 soft
HARD BLAST CHILL +3°C
Selection cycle chill +3 hard
–18°C SOFT SHOCK FREEZE
Selection cycle shock freeze -18 soft
HARD SHOCK FREEZE -18°C
Selection cycle freeze -18 hard
DEFROST
Start/stop defrost. By pressing the button for extended time,
the temperature of the evaporator probe is displayed
PROBE HEATING
Heating for extraction of core probe
MULTI-POINT/MULTIPROBE CORE PROBE
Visualizes the temperature of the needle probe
Extended pressing displays the 4 temperatures
STERILISATION
Start/stop sterilisation process
PROGRAMME
Memory or recalls a blast chill/shock freeze cycle on memory
HACCP
Enter/exit HACCP menu
Decreases values
Increases values
Start/stop the precooling cycle of the room
Description of the display and symbols
DISPLAY 3
DISPLAY 1
Displays core probe temperature or time
DISPLAY 2
Displays temperature of the cabinet
DISPLAY 3
Displays the operational phase in progress (1-3)
Number of core probe inserted in core
Cabinet temperature
Heating active core probe
Blast chill/shock freeze cycle with core probe
(flashing in core probe insertion test)
Multipoint probe automatic freez./chill. cycle
(flashing during pin insertion test)
Blast chill/shock freeze cycle with timer
Sterilisation in progress
Blast chill cycle function selected (+3ºC)
Shock freeze cycle function selected (-18ºC)
Soft phase selected
Blast chill in progress
(flashing active compressor delay)
Conservation phase in progress
Machine in Stop mode
HACCP
HACCP alarm
Compressor activity indicator
Room fans activity indicator
DISPLAY 1
DISPLAY 2