Safety; Symbols Used; Warnings - MICRO-EPSILON optoCONTROL 1201 Betriebsanleitung

Safety

1.
The handling of the system assumes knowledge of the operating instructions.
1.1
The following symbols are used in these operating instructions:
i
1.2
Connect the power supply and the display output device according to the safety regulations for electrical
operating equipment.
> Danger of injury
> Damage to the sensor
Avoid shock and vibration to the light source and receiver.
> Damage to the sensor
Supply voltage must not exceed specified limits.
> Damage to the sensor
Protect cables from damage.
> Damage to the sensor
> Failure of the measurement device
optoCONTROL 1200/1201
Safety

Symbols Used

Indicates a hazardous situation which, if not avoided, may result in minor or moder-
ate injury.
Indicates a situation which, if not avoided, may lead to property damage.
Indicates a user action.
Indicates a user tip.

Warnings

Page 33