Preparations - Tst Series; Testing Welding Torches - Fronius Testbox - Welding Torch Bedienungsanleitung

Preparations - TSt
series
MIG/MAG torches
TIG torches
LocalNet devices
Special devices
Info about testbox
4
5
LocalNet devices
RXD
TXD
+24V-LocalNet
Rec. Messages
Trc. Messages
b a d
<<<
Testing welding
LocalNet devices
torches
RXD
TXD
+24V-LocalNet
Rec. Messages
Trc. Messages
b a d
<<<
Main menu
Select
Plug the Fronius System Connector (FSC) on the welding torch into the torch connec-
tion on the FSC adapter
Connect the FSC adapter LocalNet plug to the LocalNet connection socket on the test
box
Device information
Good (13.9 mA)
Good (16.3 mA)
28.82 V
11987
11991
M s e a s g s e 0
>>>
Device information
Good (13.9 mA)
Good (16.3 mA)
28.82 V
11987
11991
M s e a s g s e 0
>>>
Use the adjusting dial to select the
1
LocalNet device work area
Press the 'Select' function key
2
- the 'Device information' screen is
displayed
- the LED above the LocalNet
connection lights up
Turn the welding torch selector switch
3
on the FSC adapter to the UP/DOWN
position
- Device information will appear
Down
NOTE! The displays will differ
slightly depending on the welding
torch used. The functionality of the
test box remains the same irre-
spective of the welding torch con-
nected.
Press the '>>>' function key
1
- an overview of the displays and
buttons on the relevant device is
displayed
Down
47