Reset-Button; Dip-Switch - Eks e-light 2M Bedienungsanleitung

Reset-button

With the reset button the switch can fast and easily be reset and restarted and the
configuration can be reset to the default value.



DIP-switch

The switch has got a 9-Dip switchfor the configuration of the operation mode,
the alarm relay and the function of the ring master. The default value of the
switch is OFF.
DIP Switch No
1
2
Bedienungsanleitung
Manual
Restart: Keep the button pressed for 2 seconds.
Reset to default value: Keep the button pressed for 5
seconds. The switch resets all configuration to the default
value.
Status Description
OFF
ON
OFF
ON
Alarm of port 1 switched off.
Alarm of port 1 active. If the port's link fails, the
fault LED lights up.
Alarm of port 2 switched off.
Alarm of port 2 active. If the port's link fails, the
fault LED lights up.
MAN_EL-2M
Version: 2.8 / 15.09.2017
Freigabe: P.S.
Seite 8 von 69