System Reboot; Save The Configuration; Bandwidth Control - Eks e-light 2M Bedienungsanleitung

System Reboot

Reboot of the switch

Please click

Save the configuration

Please save the switch configuration on the flash memory. Should you turn off the
switch before having saved, all configurations will get lost when the switch is
restarted.

Please click

Bandwidth control


Limit Packet type: Choose the type of packet that shall be filtered. The
packet types broadcast / multicast / unknown unicast, broadcast / multicast
and broadcast only apply to ingress packets. The rates for egress packets
apply for all types of packets.
Bedienungsanleitung
Manual
to restart the switch.
Reboot
System Reboot Interface
to save the configuration.
Save Flash
Save Configuration Interface
MAN_EL-2M
Version: 2.8 / 15.09.2017
Freigabe: P.S.
Seite 62 von 69