Inhaltsverzeichnis
Werbung
Trap Manager
A trap manager is a management station that receives error messages which are
generated by the switch. You can define a Trap-Manager by entering IP-Address
and Community-Strings. If no Trap-Manager is defined, no traps will occure. You
can define up to three Trap-Managers.
IP Address: Enter the IP address of the trap device.
Community Strings: The community strings of the trap device.
Then please click
Configuration Backup
In the configuration backup you can restore a backup in the switch. Furthermore,
you can save the configuration on the TFTP server.
TFTP Restore Configuration
You can reload a flash ROM content (configuration) from the TFTP server into the
switch. Please note that a value had to be saved there beforehand (see TFTP
backup)
TFTP Server IP Address: Enter the IP of the TFTP server (The default is
192.168.10.2)
Restore File Name: Enter the name of the restore image file.
Then please click
Bedienungsanleitung
Manual
.
Add
.
Apply
MAN_EL-2M
Version: 2.8
/
15.09.2017
Freigabe:
P.S.
Seite 59 von 69
Werbung
Inhaltsverzeichnis
