Inhaltsverzeichnis
Werbung
Ports
RJ-45 Ports
All in all, there are 6 ports with 10/100Mbps. The ports detect the data rate
for 10Base-T or 100Base-TX connections automatically. Auto MDI/MDIX
means that the switch can establish a connection to another switch without
havening to change the direct or cross-over cabling. The table below shows
the pin assignment for direct or cross-over cabling.
RJ-45 Pin Assignment
[Note] "+" and "-" signs represent the polarity of each wire pair.
All TX-ports of the e-light 2M support the automatic MDI/MDIX
operation.Direct cabling can be used for all network connections to PCs,
servers, other switches or hubs. In direct cablings the pins 1, 2, 3 and 6 at
one end of the cable are directly connected to the pins 1, 2, 3 and 6 at the
other end of the cable.
The table below shows the 10Base-T/100Base-TX MDI and MDIX port
outputs.
Bedienungsanleitung
Manual
Pin Number
1
2
3
6
Version: 2.8
Freigabe:
Assignment
Tx+
Tx-
Rx+
Rx-
MAN_EL-2M
/
15.09.2017
P.S.
Seite 12 von 69
Werbung
Inhaltsverzeichnis
