Port Control - Eks e-light 2M Bedienungsanleitung

Port Control

The following menu helps you to change the port status:

Port: Please choose the port.

State: Activate or deactivate the port.

Negotiation: Set the autonegotiation mode to auto or assign the speed and
duplex mode with the option force (recommended).

Speed: Set the data rate of the port

Duplex: Set the port to half duplex or duplex

Flow control: Set the flow control in the duplex mode to Symmetric or
Asymmetric. The default is Disable.

Then please click

After having chosen the port, you can see the values according to the table
below
Bedienungsanleitung
Manual
to apply the configurations set.
Apply
Port Control Interface
MAN_EL-2M
Version: 2.8 / 15.09.2017
Freigabe: P.S.
Seite 29 von 69