Sntp Configuration - Eks e-light 2M Bedienungsanleitung


Subnet Mask: Enter the subnet mask of the IP address. When the DHCP
client function is activated, you do not need to enter the subnet mask.

Gateway: Enter the gateway of the switch, the default value is
192.168.16.254 .

Then please click

SNTP Configuration

In this paragraph you can configure the SNTP (Simple Network Time Protocol)

SNTP Client: Activating or deactivating the SNTP function in order to receive
the time from the SNTP server.

Daylight Saving Time: Activating or deactivating the summer time function: If
the summer time function is activated, you have to configure the time period of
the summer time.

UTC Timezone: Setting the time zones: The table below contains the different
time zones. You can scroll down to find the requested time zone.
Bedienungsanleitung
Manual
.
Apply
IP Konfiguration Interface
MAN_EL-2M
Version: 2.8 / 15.09.2017
Freigabe: P.S.
Seite 43 von 69