Tftp Update Firmware; Factory Settings - Eks e-light 2M Bedienungsanleitung

TFTP Update Firmware

Offers solutions that allow updating the switch firmware. Before you update, please
make sure that the TFTP server is ready and that the firmware image is saved on it.

TFTP Server IP Address: Enter the TFTP server ID.

Firmware File Name: Enter the file name of the switch firmware image

Then please click

Factory settings

Sets the switch back to the default configuration (factory setting).

Please click
Bedienungsanleitung
Manual
.
Apply
TFTP Update Firmware Interface
to set the switch back to the default configuration.
Default
Factory Default Interface
MAN_EL-2M
Version: 2.8 / 15.09.2017
Freigabe: P.S.
Seite 61 von 69