Mounting on DIN rail
As standard, e-light 2M has got a clip for 35mm DIN rails according to DIN EN 60175.
For mounting the system please engage it onto the rail at the bottom side (see left
picture), press it against the spring force to the top (1) and then towards the mounting
plate (2). The system latches as shown in the picture at the right.
Please refer to the above mentioned steps in reverse order to demount the switch.
As an option, a wall mount kit is also available (art. no. 065065). If the system should
be fixed onto the wall, the clip for DIN rail mount has to be unscrewed first.
Bedienungsanleitung
Manual
MAN_EL-2M
Version: 2.8
/
15.09.2017
Freigabe:
P.S.
Seite 17 von 69