Port Status - Eks e-light 2M Bedienungsanleitung

Port Status

The status depends on the user's settings. The table shows the following settings:

Port: Port number.

Type: Data rate and port::
100TX = 100Mbps for RJ45
10TX
100FX = 100Mbps for the fiber optic port

Link: "Down" means "No Link". "UP" means "Link".


Negotiation: Shows the autonegotiation mode:
auto/force. "Speed Duplex: Shows the connection speed of the port
"Config" shows the configured value.
„Actual" shows the current port value.

Flow Control: Shows the flow control status
"enable" or "disable" in full duplex mode.
"Config" shows the configured value.
"Actual" shows the current port value.
Bedienungsanleitung
Manual
= 10Mbps for RJ45
State: Shows the status "disable", "enable"
Port Status Interface
MAN_EL-2M
Version: 2.8 / 15.09.2017
Freigabe: P.S.
Seite 26 von 69