Eks e-light 2M Bedienungsanleitung Seite 63


Band Width: Port 1 ~ Port 8 support the ingress and egress control rate.
Assuming that port 1 has got 10 MBps, the user can set the effective egress
rate as 1 Mbps and the ingress rate is 500 KBps. With the help of internal
packet counter, the switch complies with the ingress rate in order to reach a
specific rate.

Ingress: Select the effective ingress rate of the port. The options to
choose from are 128KBps, 256KBps, 512KBps, 1MB, 2MB, 4MB and 8MB.
The default value is disable.

Egress for all: Select the effective egress rate rate of the port . The
options to choose from 128KBps, 256KBps, 512KBps, 1MB, 2MB, 4MB
und 8MB. The default value is disable.

Then please click
[Note]
1. Please remember to save the configuration, otherwise it will get lost
when the switch is turned off.
2. QoS and bandwidth control cannot work simultaneously.
Bedienungsanleitung
Manual
to apply the configuration.
Apply
Rate Control Interface
MAN_EL-2M
Version: 2.8 / 15.09.2017
Freigabe: P.S.
Seite 63 von 69