Inhaltsverzeichnis
Werbung
Quicklinks
e-light 2M
Art.-Nr.: 0 41000100XXXXEV10-00
eks Engel FOS GmbH & Co. KG
Schützenstraße 2-4
57482 Wenden-Hillmicke
Germany
Tel:
Fax:
E-Mail:
Internet:
Bedienungsanleitung
Manual
+49 (0) 2762 9313-600
+49 (0) 2762 9313-7906
info@eks-engel.de
www.eks-engel.de
MAN_EL-2M
Version: 2.8
/
15.09.2017
Freigabe:
P.S.
Seite 1 von 69
Werbung
Inhaltsverzeichnis
Verwandte Anleitungen für Eks e-light 2M
Inhaltszusammenfassung für Eks e-light 2M
- Seite 1 Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 1 von 69 e-light 2M Art.-Nr.: 0 41000100XXXXEV10-00 eks Engel FOS GmbH & Co. KG Schützenstraße 2-4 57482 Wenden-Hillmicke Germany Tel: +49 (0) 2762 9313-600 Fax: +49 (0) 2762 9313-7906 E-Mail: info@eks-engel.de Internet: www.eks-engel.de...
-
Seite 2: Inhaltsverzeichnis
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 2 von 69 Content Introduction ..............5 Characteristics ............5 Packing content ............6 View of front panel ........... 7 Reset-button............. 8 DIP-switch ..............8 LED Indications ............10 Ports ............... 12 Cabling .............. - Seite 3 MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 3 von 69 System Login ............24 Port Status .............. 26 Single Port Information ............ 27 Port Statistics ............28 Port Control ............. 29 Switch Settings ............30 Port Mirroring ............31 VLAN Configuration ..........
- Seite 4 MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 4 von 69 P-Ring ..............50 QoS Configuration ..........52 IGMP ..............55 Security Manager ........... 56 SNMP Configuration ..........57 Community Strings ............58 Trap Manager ..............59 Configuration Backup ..........59 TFTP Restore Configuration ..........
-
Seite 5: Introduction
Manual Freigabe: P.S. Seite 5 von 69 Introduction e-Light 2M is a managed 6x10/100TX plus 2x100FX Industrial ring switch especially designed for industrial applications. A Web GUI allows the very easy management of e-light 2M. Characteristics According to IEEE 802.3 10Base-T, 802.3u 100Base-TX/100Base-FX ... -
Seite 6: Packing Content
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 6 von 69 Packing content Please compare the packings content with the list below: e-light 2M Ring Managed Industrial Switch Manual... -
Seite 7: Hardware Description
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 7 von 69 Hardware description This section contains information about the hardware ,the ports, the cabling and the installation of e-light 2M. View of front panel Front panel of e-Light 2M... -
Seite 8: Reset-Button
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 8 von 69 Reset-button With the reset button the switch can fast and easily be reset and restarted and the configuration can be reset to the default value. Restart: Keep the button pressed for 2 seconds. ... - Seite 9 MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 9 von 69 Alarm of port 3 switched off. Alarm of port 3 active. If the port’s link fails, the fault LED lights up. Alarm of port 4 switched off. Alarm of port 4 active. If the port’s link fails, the fault LED lights up. Alarm of port 5 switched off.
-
Seite 10: Led Indications
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 10 von 69 Function ring master switched off. Function „switch as ring master in ring group“ active. [Note] If the function „port alarm“ is active, the LED flashes and the alarm relay signals port errors. - Seite 11 MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 11 von 69 Green Power input at VDC 2 VDC 2 No power input at VDC 2 Voltage breakdown, RJ45-port error or fiber optic Yellow port error Fail No voltage breakdown, RJ45-port error or fiber optic port error Green The switch is the master of the ring group.
-
Seite 12: Ports
Assignment [Note] “+” and “-” signs represent the polarity of each wire pair. All TX-ports of the e-light 2M support the automatic MDI/MDIX operation.Direct cabling can be used for all network connections to PCs, servers, other switches or hubs. In direct cablings the pins 1, 2, 3 and 6 at one end of the cable are directly connected to the pins 1, 2, 3 and 6 at the other end of the cable. - Seite 13 MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 13 von 69 Pin MDI-X Signal Name MDI Signal Name Receive Data plus (RD+) Transmit Data plus (TD+) Receive Data minus (RD-) Transmit Data minus (TD-) Transmit Data plus (TD+) Receive Data plus (RD+) Transmit Data minus (TD-) Receive Data minus (RD-) Direct cabling...
-
Seite 14: Cabling
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 14 von 69 Please refer to the scheme below when cabling two fiber optic ports. False cabling may lead to the port not working properly. Attention Do not look into the laser or the LED! Cabling ... - Seite 15 MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 15 von 69 Wiring the power supply Please connect the power supply to the clamps VDC1 and GND. The redundant power supply shall be connected to VDC2 and GND. The terminal block for the power supply is stackable and can be locked with two screws.
-
Seite 16: Connecting The Differential Relay
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 16 von 69 Connecting the differential relay There is a potential free differential relay contact (semiconductor relay) at the clamps K1 to K4; K1 and K3 are the common connectors of the relay. If a voltage breakdown, a RJ45-port error or a fiber optic port error is detected, the differential relay drops down (K1-K2 closed and K3-K4 opened). -
Seite 17: Mounting On Din Rail
Seite 17 von 69 Mounting on DIN rail As standard, e-light 2M has got a clip for 35mm DIN rails according to DIN EN 60175. For mounting the system please engage it onto the rail at the bottom side (see left picture), press it against the spring force to the top (1) and then towards the mounting plate (2). -
Seite 18: Ports And Dimensions
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 18 von 69 Ports and dimensions The following view shows the ports and the dimensions of the e-light 2M switch:... -
Seite 19: Hardware Installation
Freigabe: P.S. Seite 19 von 69 Hardware Installation This paragraph describes how to install the e-light 2M switch: Procedure: 1. Unpack the switch. 2. Switch the device on. Tips regarding wiring can be found in the paragraph wiring the power supply. The power LED lights up. Its meaning can be found in the paragraph LED indications. - Seite 20 MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 20 von 69 Network application This paragraph shows some sample applications of the switch.
-
Seite 21: Ring Function
Seite 21 von 69 Ring Function The industrial switch supports the eks pathfinder ring mode (P-Ring) that helps the system to recover from network breakdowns within 300ms or less; that makes the network more reliable. The ring function is similar to the SPT (Spanning Tree Protocol), but its recovery time is shorter. -
Seite 22: Coupling Ring Application
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 22 von 69 Coupling Ring Application There can also be more than one ring group in a network. With the help of the coupling ring function, two rings can be connected with a redundant backup path. It ensures that the transmission between two ring groups works without any fault. -
Seite 23: Dual Homing Application
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 23 von 69 Dual Homing Application The dual homing function prevents a connection loss between the ring group and the upper switches by connecting two switches per ring group to the upper switches. Each of the two switches has one connection upper level. -
Seite 24: Web-Based Management
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 24 von 69 Web-Based Management This paragraph describes the configuration and function of the web-based management. Preparations Before using the web management, please install the switch in the network and make sure that every PC in the network has access to the switch with the help of the web browser. - Seite 25 MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 25 von 69 Please press “Enter” or click ”OK”, then the below shown web based management mask will appear. Toolbar View of front panel Configuration mask Home Interface...
-
Seite 26: Port Status
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 26 von 69 Port Status The status depends on the user’s settings. The table shows the following settings: Port: Port number. Type: Data rate and port:: 100TX = 100Mbps for RJ45 10TX = 10Mbps for RJ45 100FX = 100Mbps for the fiber optic port... -
Seite 27: Single Port Information
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 27 von 69 Single Port Information Please click directly on a port in the picture of the device. Then the information interface for the corresponding port opens. The current port information are shown. Port Information Interface... -
Seite 28: Port Statistics
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 28 von 69 Port Statistics The following table shows the port statistics Please click to delete all figures Clear Port Statistics Interface... -
Seite 29: Port Control
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 29 von 69 Port Control The following menu helps you to change the port status: Port: Please choose the port. State: Activate or deactivate the port. Negotiation: Set the autonegotiation mode to auto or assign the speed and duplex mode with the option force (recommended). -
Seite 30: Switch Settings
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 30 von 69 Switch Settings This paragraph describes how to determine the name, the location and the contact person. System Name: Determine the name of the switch. The maximum length is 64 characters ... -
Seite 31: Port Mirroring
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 31 von 69 Port Mirroring Port mirroring is a method to monitor the traffic in certain ports. That means that the incoming and outgoing traffic in the ports monitored are duplicated in a mirror port. ... -
Seite 32: Vlan Configuration
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 32 von 69 [Note] Chose “disable” in the mirror mode to deactivate the mirroring. Please remember to save the configuration, otherwise it will get lost, when the switch is turned off. VLAN Configuration A virtual LAN (VLAN) is a logical network group that limits the broadcast domain. -
Seite 33: Port-Based Vlan
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 33 von 69 Port-Based VLAN Packets can only be interchanged between members of the same VLAN group. Please keep in mind that all the unselected ports will be treated as if they belonged to a different VLAN. - Seite 34 MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 34 von 69 Enter the VLAN name and the group ID and then add the required ports to the VLAN group. Then please click Apply VLAN PortBase Add Interface ...
- Seite 35 MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 35 von 69 802.1Q VLAN Tagged-based VLAN is a IEEE 802.1Q norm that allows setting up a VLAN between devices of different manufacturers. IEEE 802.1Q VLAN uses a technique to insert a tag into an Ethernet data frame.
- Seite 36 MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 36 von 69 port ID (with which you have access to the management) in the VLAN and the VLAN ID are the same. Please enter the corresponding VLAN ID number into the column provided then click to activate the function.
- Seite 37 MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 37 von 69 Click and follow the steps in the next interface: Next Please click to set if the outgoing VLAN frames are tagged or untagged Apply Tag: Outgoing frames with VLAN tagged ...
-
Seite 38: 802.1Q Vlan
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 38 von 69 802.1q VLAN Port VLAN ID Interface [Note] Please remember to save the configuration, otherwise it willget lost, if the switch is turned off. -
Seite 39: Alerts
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 39 von 69 Alerts There are three kinds of alert – email, event and power alarm alerts that can be configured. Configuration of email alerts If certain events occur, the system will send a message to the email address given. You can set the mail server IP, the email account and the forwarding function to receive the system alerts. -
Seite 40: Event Configuration
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 40 von 69 Email Alert Configuration Interface Event configuration The events that have been chosen and have occured send an alert to the indicated SMTP server. You can also select port events to be alerted. ... - Seite 41 MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 41 von 69 SMNP Authentication Failure: If a SNMP authentification fault occurs, the system sends an alert to the SMTP server. Ring Topology Change: If the ring topology changes, the system sends an alert to the SMTP server.
-
Seite 42: Power Alarm Configuration
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 42 von 69 Power alarm configuration The power alarm configuration activates the relay contact. Without activating the power alarm function the relay alarm will not work. Tick the box if you want to monitor the power supply and then click Apply Power Alarm Interface IP Configuration... -
Seite 43: Sntp Configuration
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 43 von 69 Subnet Mask: Enter the subnet mask of the IP address. When the DHCP client function is activated, you do not need to enter the subnet mask. Gateway: Enter the gateway of the switch, the default value is 192.168.16.254 . - Seite 44 MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 44 von 69 Conversion Time at Local Time Zone from UTC 12:00 UTC November Time Zone - 1 hour 11am Oscar Time Zone -2 hours 10 am ADT – Atlantic Daylight -3 hours 9 am AST –...
- Seite 45 MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 45 von 69 USSR Zone 7 JST - Japan Standard, USSR Zone 8 +9 hours 9 pm EAST - East Australian Standard GST Guam Standard +10 hours 10 pm USSR Zone 9 IDLE - International Date Line NZST - New Zealand Standard +12 hours...
-
Seite 46: Ip Security
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 46 von 69 IP Security The IP security function allows you to enter 10 specific IP addresses that have access to the switch via the web browser in order to secure the management of the switch. -
Seite 47: Rstp Configuration
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 47 von 69 RSTP Configuration The Rapid Spanning Tree Protocol is a further development of the Spanning Tree Protocol and offers a faster convergence after a change in topology. Furthermore, the system supports STP and auto-detects the connected device with STP and RSTP. - Seite 48 MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 48 von 69 [Note] Please follow the below written rule to configure MAX Age, Hello Time and Forward Delay Time. 2 x (Forward Delay Time value –1) > = Max Age value >= 2 x (Hello Time value +1) Please remember to save the configuration, otherwise it will get lost when the switch is turned off.
-
Seite 49: Per Port Configuration
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 49 von 69 Per Port Configuration Configuration of the costs and priority of each port. Choose a port from the column „port“. Path Cost: The costs from the sending bridge at the respective port to the other bridge. -
Seite 50: P-Ring
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 50 von 69 RSTP – Per Port Configuration Interface P-Ring A ring offers a faster, redundant recovery time than a spanning tree topology. The effect is similar to the one with STP and RSTP, the algorithms, however, are not equal. - Seite 51 MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 51 von 69 If the network connection fails, the backup port automatically becomes the working port in order to trouble-shoot. The switch has got a DIP switch for setting it as ring master or to slave-mode. The ring master is allowed to negotiate and give orders to the other switches within the ring group.
-
Seite 52: Qos Configuration
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 52 von 69 Ring Interface [Note] 1. When the ring function is activated, the RSTP must be deactivated. Ring function and RSTP protocol cannot work simultaneously. 2. Please remember to save the configuration, otherwise it will get lost when the switch is turned off. - Seite 53 MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 53 von 69 Priority scheme: Each port has 5 possibilities to choose from: Port-base: The port priority refers to the standard port priority that is determined by the user. ...
- Seite 54 MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 54 von 69 QoS Configuration Interface...
-
Seite 55: Igmp
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 55 von 69 IGMP The Internal Group Management Protocol (IGMP) is an internal protocol of the Internetprotocol (IP). IP controls the multicast traffic via switches, routers and hosts that support IGMP. Activating the IGMP enables the ports to detect IGMP-queries and reports and to manage the IP multicast traffic in the switch. -
Seite 56: Security Manager
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 56 von 69 IGMP Snooping Interface [Note] Remember to save the configuration otherwise it will get lost when the switch is turned off. Security Manager Changing the web-management’s user name and password for security management: User name: Enter a new user name (the default name is root) Password: Enter a new password (the default password is root) -
Seite 57: Snmp Configuration
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 57 von 69 Security Manager Interface [Note] Please remember to save the configuration otherwise it will get lost when the switch is turned off. SNMP Configuration The SNMP is a protocol that controls the information flow between management and agent. -
Seite 58: Community Strings
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 58 von 69 SNMP Management Interface Community Strings Strings: Enter the name of the string. RO/RW: Please enter the access mode (RO= read only, RW= read write) Then please click... -
Seite 59: Trap Manager
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 59 von 69 Trap Manager A trap manager is a management station that receives error messages which are generated by the switch. You can define a Trap-Manager by entering IP-Address and Community-Strings. If no Trap-Manager is defined, no traps will occure. You can define up to three Trap-Managers. -
Seite 60: Tftp Backup Configuration
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 60 von 69 TFTP Restore Configuration Interface TFTP Backup Configuration You can save the current flash ROM content (configuration) on the TFTP server. TFTP Server IP Address: Enter the TFTP server ID. ... -
Seite 61: Tftp Update Firmware
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 61 von 69 TFTP Update Firmware Offers solutions that allow updating the switch firmware. Before you update, please make sure that the TFTP server is ready and that the firmware image is saved on it. ... -
Seite 62: System Reboot
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 62 von 69 System Reboot Reboot of the switch Please click to restart the switch. Reboot System Reboot Interface Save the configuration Please save the switch configuration on the flash memory. Should you turn off the switch before having saved, all configurations will get lost when the switch is restarted. - Seite 63 MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 63 von 69 Band Width: Port 1 ~ Port 8 support the ingress and egress control rate. Assuming that port 1 has got 10 MBps, the user can set the effective egress rate as 1 Mbps and the ingress rate is 500 KBps.
-
Seite 64: System Log
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 64 von 69 System Log Setting and seeing the system log events. System Log Configuration Please have a look at the events of the system log here: Click for the latest system log events. Reload ... -
Seite 65: Event Configuration
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 65 von 69 Event configuration You can select different system log events. When the selected events occur, the system sends a log information. System event selection: You can choose from the following options: device coldstart, power status, SNMP authentification failure and changing the ring topology. - Seite 66 MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 66 von 69 Event Configuration Interface...
-
Seite 67: Trouble Shooting
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 67 von 69 Trouble shooting Please check the correct power supply. Choose the right UTP cable. Use “unshielded twisted pair” (UTP) or “shileded twisted pair” (STP) for RJ45 connections to establish the network: 100 Ω category 3, 4 or 5 cables for 10MBps connections or 100 Ω... -
Seite 68: Technical Details
MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 68 von 69 Technical details POF-FO EL100M2-6TX-2FX-PO-ST EL100M2-6TX-2FX-PO-SMA Order no. 0410001000101EV10-00 0410001000202EV10-00 100 FX Ports 2 x ST 2 x SMA Fiber type POF / Kunststoff-Lichtwellenleiter Fiber type 980/1000µm Attenuation 180dB/km Bandwidth Standard-POF: 10MHz x 100m Low-NA-POF: 150MHz x 100m... - Seite 69 MAN_EL-2M Bedienungsanleitung Version: 2.8 15.09.2017 Manual Freigabe: P.S. Seite 69 von 69 10/100Base TX Ports RJ45 / Auto negotiation / Auto MDX/MDIX / supports lengths up to 100m (CAT 5) Power supply 12-70 VDC redundant power supply Power consumption Potential separation 500 V Dimensions H: 156mm B: 70mm T: 127mm...