Eks e-light 2M Bedienungsanleitung Seite 53

 Priority scheme: Each port has 5 possibilities to choose from:

Port-base: The port priority refers to the standard port priority that is
determined by the user.

COS only: The port priority only refers to the COS priority that is
determined by the user.

TOS only: The port priority only refers to the TOS priority that is
determined by the user.

COS first: The port priority firstly refers to the COS priority then to the
other priority rules.

TOS first: The port priority firstly refers to the TOS priority then to the
other priority rules.
 COS Priorität: Set the COS priority level to 0~7.
 TOS Priorität: The system offers 0~63 TOS priority levels. Each level has got
4 priority types – high, medium, low und lowest. The default value of each level
is „Lowest". When the IP packet has arrived, the system checks the value of the
TOS level in the IP packet.
Example: The user determines that the TOS level is 25. Port 1 only refers to the
TOS priority. When the packet has arrived at port 1, the system checks the
TOS value of the IP packet. When the TOS value of the IP packet is 25 (high
priority), the packt has highest priority.
[Notice] QoS and rate control cannot work simultaneously.
Bedienungsanleitung
Manual
MAN_EL-2M
Version: 2.8 / 15.09.2017
Freigabe: P.S.
Seite 53 von 69